KAIWEETS HT100 Spannungsprüferstift

$14.99
Versand An der Kasse berechnet.
Berührungslos - With NCV inductive probe for AC voltage; Just place the tip near a terminal strip, outlet, or supply cord. When the tip glows red and the pen beeps, you know there's voltage present.
Dual-Range - Detects standard and low voltage (12-1000V AC / 48-1000V AC). The NCV sensor automatically recognizes the voltage and displays it on the bar graph.
Sicherheitsstufe - IEC-rated CAT III 1000V CAT IV 600V, Meets CE requirements; The electrical tester is safely double insulated. High Voltage Alert to warn you of voltage above 90V, the screen turn red, and the safety symbol on the screen shine.
Kompaktes Design - Bright LED flashlight for work in dim areas; Low-Power-Indicator when battery voltage is below 2.5V; Automatic Power Off after 3 minutes without operation or signal detection; Pocket-sized, pen hook allows you to carry it in your shirt pocket.

AUSLIEFERN: US

US
EU

Farbe: Rot

Rot
Red

Dieses Produkt ist derzeit nicht vorrätig und nicht verfügbar.

Benachrichtigen Sie mich, wenn dieses Produkt auf Lager ist

Kostenloser Versand Aus Lokal Lager
Ankunft in 5-20 Werktage
Sichere Zahlung

apple paymaestromasterpaypalshopify payvisa

KAIWEETS HT100 berührungsloser Spannungsprüferstift AC

Produktdetails
Einstellbare Empfindlichkeit mit Dual Range
Low Sensitivity Mode: 12V TO 48V AC: No Beep, Green Screen. 48V TO 1000 V AC: High-frequency beep, the red tip illuminates continuously, red screen. High Sensitivity Mode: 12V TO 48V AC: Low-frequency beep, The red tip illuminates continuously. 48V TO 1000 V AC: High-frequency beep, the red tip illuminates continuously, red screen.
Nulldraht- und stromführende Drahtprüfung
Null Wire Testing The buzzer will give a slow alarm when the end of the tester is close to the object being tested. The red indicator light flashes slowly and the LCD shows green. Indicates that the tested line is a Null Wire Live Wire Testing The buzzer will give a quick warning when the end of the tester is close to the object being measured. The red indicator light flashes quickly and the LCD shows red. This indicates that the line being tested is a live line.
Bruchpunkttest
Move the NCV tip of the tester along the wire, if the voltage alert signs disappear, that is most probably the breakpoint.
LED-Taschenlampe
You can press and hold the “S” button for more than 2 seconds to turn the LED flashlight on/off, and then quickly use it to find problems in the circuit. The LED flashlight provides convenience in a dark environment.
Strom sparen
Saving Power Automatic Power Off after 3 minutes without operation or signal detection. Battery replacement Rotate the battery cover, remove the battery, and insert the positive terminal of the new battery toward the tip of the tester.
Leicht zu tragen
A pocket-sized pen with a hook allows you to carry it in your pocket.
Hören wir uns die Bewertungen echter Kunden an