CTECHi GT200 Portable Power Station

Using the most advanced quad-core laser technology, Laser B1 20W has a powerful 20W optical output power, which is one of the most powerful diode lasers today, so it has stronger cutting ability. Laser B1 can cut 15mm pine, 8mm black acrylic and 0.05mm stainless steel at one time.

Adopting the most cutting-edge laser coupling technology, Laser B1 has a thinner but stronger laser beam, which increases the cutting capacity by more than 20% compared with other 20W lasers. It can cut 25mm wood board, 35mm black acrylic by multiple passes.

With a working area of 17.72x17.32 inches/450x440mm, the working size of Laser B1 has increased by 23.75% compared with other products, which meets the needs of most scenarios, especially for A3 panels.

Laser B1 is equipped with a new 32-bit motherboard, and the engraving speed can reach 30,000mm/min, which is four times faster than ordinary laser engraving machines. In addition, the TMC2209 silent driver is used to effectively reduce the operating noise and provide a faster and more enjoyable experience.

The high-energy laser beam instantly oxidizes the metal surface, bringing 300+ rich colors to meet your colorful creative needs.

The air assist pump can be turned on/off automatically. This is directly controlled by the program, according to the parameters set in Lightburn, which greatly enhances the cutting ability, and also significantly improves the cutting accuracy and quality.

Set 8 safety protection functions of moving/flame/offline/stationary/safety lock/eye protection/emergency stop button/return to zero. The laser is automatically turned off when a drop, flame, data disconnection, or laser head freeze is detected for more than 15 seconds. In addition, the laser head is automatically zeroed to avoid burning out when igniting. Panoramic filter glass can effectively filter 99.8% of laser light, making it safer to use.

Laser B1 adopts aluminum frame and improved mechanical design, which is very stable even in high-speed working mode. This helps in making better carving and cutting art.

The laser module integrates a pull-down focus bar, which is easy to use, just pull down the focus bar, and move the bar towards the surface of the working panel.

The X-axis and Y-axis limit switches are added to accurately locate the position of the laser module. At the same time, if the laser module moves to the negative direction of X-axis or Y-axis, Laser B1 20W will trigger an alarm and stop moving.

The laser module is equipped with a replaceable protective lens, which can effectively prevent the pollution of the laser lens by smoke and greatly improve the service life of the laser module.

Data can be transmitted in different ways, Wi-Fi, USB data cable, APP and TF card. The 3.5-inch touch screen supports offline operation. You can use it anywhere without being limited by a physical connection to your computer.

Laser B1 is compatible with various mature engraving software such as LaserGRBL and LightBurn. It supports Windows 7+, macOS, Linux; the engraving file format supports JPG, PNG, BMP, G-code, GIF, SVG, NC, GC, etc.

One computer can control multiple laser engraving machines at the same time to improve production efficiency.