Since I've had my LONGER RAY5 10W laser engraver for about five months, I've been incredibly happy with the creative opportunities it has opened up. Actually, I have a large financial and creative commitment in this equipment as the owner. Although the initial investment may seem excessive, I've already more than made up for it through sales of engraved gifts, custom signage for neighborhood companies, and commissions from creative DIYers eager to advance their projects.

It does, however, need the appropriate care and maintenance to continue working properly and creating outstanding work, just like any equipment that enables you to accomplish results of a professional caliber. That’s why I want to share some tips I've picked up along the way for getting the most out of your LONGER RAY5 10W laser engraver. If you also want to make the most of your investment, then come with me!

Regular cleaning

Spend a few minutes wiping down your laser engraver with a clean, dry towel after each usage. Any dust, debris, or residue that may have developed during use may be helped to eliminate by doing this. Due to their propensity to gather junk, the laser head and the exhaust fan deserve extra attention.

To clear any debris from difficult-to-reach spots, you could use compressed air. Make sure to use a can of compressed air specifically designed for electronics, as other types of compressed air may contain harmful chemicals. Trust me, a professional field needs a specialized treatment!

What’s more, to produce high-quality engravings, the lens of your laser engraver is an essential component that must be kept clean. Usually, I use a microfiber cloth and lens cleaning solution to clean the lens. More attention, abrasive or harsh chemicals should not be used since they may scratch the lens.

Correct maintaining

It's critical to maintain your laser engraver generally in addition to these particular responsibilities. This entails adhering to the use and maintenance guidelines provided by the manufacturer as well as performing any suggested maintenance procedures.

For instance, you might need to oil the focus rail, X-Y axis guide rails, and Z axis guide rods on a regular basis. The prescribed lubricants should be used to keep these moving parts sliding easily.

Besides, you might need to oil the focus rail, X-Y axis guide rails, and Z axis guide rods on a regular basis since this step can keep these moving parts sliding easily. Frequently, I oil them once half month before the parts getting stuck.

Reduced airflow from a clogged filter can harm the equipment. So you may need to periodically change the filters, such as the exhaust filter and the dust collection filter. Last month, I forgot to change the filter, which caused a serious blockage, making it impossible for me to continue my work. I got a severe blow!

Since stagnant, contaminated water won't be able to effectively cool the machine during engraving, it's crucial to replenish the cooling system's water. Don’t forget to replace the cooling system's water, drain the reservoir and replace it with clean, fresh water as directed.

Prevent further damage

It might be necessary to repair one of these vital pieces if you discover that your engravings are becoming less clear or accurate, developing hollow sections or rough edges, or if you hear odd squealing, grinding, or crackling noises coming from the moving parts. I don't believe any normal guy can ignore these strange noises! If the lens becomes scratched, cracked or warped, you had better replace it since the damaged will negatively impact engraving quality and clarity. If your engravings seem underpowered or the tube is overheating, the laser tube may be reminding you to take care of it! If not, over thousands of operating hours, it will gradually lose strength and efficiency.

I hope you guys don't skimp on replacing these parts since you have already paid so much money for the machine. And if the machine is damaged for worn parts, then you actually lose more!

Be caution to your safty

At all times, I put safety first, you know. Always wearing appropriate safety gear, such as safety glasses and gloves, is non-negotiable when operating your laser engraver. As material is cut or engraved, laser engravers emit highly intense visible laser light as well as potentially toxic fumes or smoke. This is why you need to place your engraver in a space that has good ventilation and exhaust ventilation. Never operate an engraving machine in a closed-off area or garage. A large amount of harmful gas may hurt us, and even can cause death if the person not saved in time. Everyone should remember don't let your family and friends worry about you! Furthermore, always keep combustible objects away from the laser engraver, especially paper, textiles, and plastics since they might catch fire from the laser beam. Never go unaccompanied near an engraving machine that is in use.

You'll develop an instinctive feel for maximizing the performance of your LONGER RAY5 10W laser engraver with each and every cut or engraving with time and effort. Never, however, lose focus on safety. Always use caution, never override controls, and never tamper with the laser engraver without permission. When in doubt, it's better to be safe.

Conclusion

Visit our website to find you the one that suits you best.