Troubleshooting Common Anycubic Photon Problems and Issues

Troubleshooting Common Anycubic Photon Problems and Issues

Troubleshooting Common Anycubic Photon Problems and Issues

3D printing has revolutionized the world of manufacturing and prototyping. Among the many brands available, Anycubic's Photon series has earned a reputation for delivering high-quality prints at an affordable price. However, users may still face some common problems and issues when using a 3D printer like the Anycubic Photon M3 or Photon M3 Plus. In this article, we will explore some of these challenges and offer solutions to help you get the most out of your 3D printer.

1. Poor Adhesion to the Build Plate

One of the most frustrating issues that can occur when using a 3D printer is when your model doesn't stick to the build plate. This is a common problem that can occur with the Anycubic Photon, as well as other 3D printers. There are several factors that can contribute to this problem, such as an unclean build plate, an uneven surface, or incorrect leveling.


Anycubic photon


Failure to properly apply the resin to the build plate could result in failed prints. Make careful to clean the build plate with isopropyl alcohol or any comparable cleaning agent prior to each print to prevent this. Incorrect leveling or an uneven surface can also prevent the model from adhering properly, which can lead to a print that is twisted or comes away from the build plate. Make sure the build plate is level and that the gap between the build plate and the printing screen is the right distance to solve this problem. Utilizing a piece of paper, you can measure the distance between the platform and the printing screen. Then, you may adjust the leveling screws till the distance is ideal. When adhering your models, using high-quality filament, such as the Geeetech Matte PLA 1.75mm 1kg/roll, can also enhance adhesion and improve print success.


Clean the build plate with isopropyl alcohol to remove any residual material or contaminants.

Ensure that the laser-engraved aluminum alloy platform is level. Follow the user manual's instructions for leveling the platform on your specific Photon model.

Adjust the exposure settings on your Photon 3D printer to increase the adhesion of the first few layers.

Solve Anycubic Photon troubles with ease, and unlock endless possibilities with GearBerry's top-quality tools and equipment! >>>


Anycubic Photon 3D printer

2. Incomplete or Failed Prints

Another common issue that can occur with the Anycubic Photon and other 3D printers is failed prints or incomplete prints. This issue can be caused by several factors, such as insufficient resin in the vat, incorrect resin settings, or issues with the LCD screen. It's important to troubleshoot these issues by checking the resin levels, adjusting the settings in the slicing software, and ensuring the LCD screen is clean and functioning properly. With the right approach, you can overcome these issues and achieve successful, high-quality prints every time.


Ensure that there is enough resin in the vat before starting a print. The Photon M3 Plus comes with an auto-feed unit to help prevent resin shortages.

Use the recommended resin settings for your specific resin type. If unsure, start with the default settings provided by Anycubic and adjust as necessary. For consistent and reliable prints, consider using Geeetech ABS 1.75mm 1kg/roll resin.

Check the LCD screen for any damage or scratches. Apply the screen protector included with your Photon 3D printer to prevent further damage.

GearBerry offers expert advice and a wide selection of tools to keep your Anycubic Photon running smoothly. >>>

Anycubic Photon M3


3. Print Quality Issues

A typical source of annoyance for 3D printer users, especially Anycubic Photon users, is poor print quality. These problems, which include layer lines, warping, and uneven surfaces, can be brought on by a number of different things. Incorrect exposure settings, for instance, might lead to the resin being overexposed or underexposed, which leaves a print with little detail or accuracy. Temperature changes can also have an impact on print quality by altering how the resin behaves and creating warping or uneven surfaces. Print quality problems can also result from mechanical problems with the Z-axis, such as incorrect alignment or damaged components. It's crucial to carefully calibrate your printer, keep an eye on temperature and exposure settings, and make sure all mechanical parts are operating correctly if you want to solve these issues. By troubleshooting these issues, you can improve the quality of your prints and achieve the level of detail and accuracy you desire.


Check and adjust your exposure settings. Longer exposure times can help improve print quality but may also increase the risk of overexposure and warping. Using quality resin like the Geeetech PETG 1.75mm 1kg/Roll can also improve the final print quality.

Ensure that your 3D printer is in a stable environment with minimal temperature fluctuations. Sudden changes in temperature can cause the resin to contract or expand, affecting print quality.

Inspect and clean the Z-axis linear guides and ball screw. Ensure that the Z-axis accuracy is set to 10 microns for both the Photon M3 and Photon M3 Plus.

GearBerry provides the tools and support you need for seamless Anycubic Photon printing. >>>


Photon M3 Plus

4. Slow Printing Speed

Even while the Anycubic Photon M3 and M3 Plus have higher printing rates than many competitors' products, users could nevertheless encounter print times that are longer than they had anticipated. This can be the result of improper exposure settings, a USB device that is too full, or problems with the slicing software.


Adjust your exposure settings to find the optimal balance between print speed and quality. Lower exposure times will generally result in faster prints but may compromise quality.

Ensure that your USB-A 2.0 or 3.0 drive is not overloaded with files. A cluttered USB drive can slow down data input and increase print times.

Use Anycubic's professional self-developed slicing software, which is free to use and fully compatible with all Anycubic LCD machines, to optimize your print settings.

5. Connectivity Issues

For remote file transmission and printing, the Anycubic Photon M3 Plus has a number of options, including USB-A 2.0, USB-A 3.0, LAN, and WAN control methods. However, when trying to print wirelessly, certain users could run into connectivity problems. This could be annoying, especially if you use remote printing to make your designs. Network interference, out-of-date firmware, and improper network configurations are common reasons for connectivity issues. It's crucial to fix the issue by reviewing your network settings, updating firmware, and making sure the printer is correctly connected to the network in order to resolve these problems. To avoid problems with wireless connectivity, it could occasionally be essential to use a cable connection. By taking steps to resolve these issues, you can enjoy seamless remote printing with your Anycubic Photon M3 Plus and avoid the frustration of connectivity problems.

3D printer


Ensure that your Photon M3 Plus firmware is up to date to take advantage of cloud service features.

Check your network settings and make sure your 3D printer is properly connected to your network. Refer to the user manual for instructions on setting up LAN and WAN connections.

If you are using the optional camera for remote monitoring, ensure that it is properly installed and connected. Note that the camera is not required for cloud services, but it is necessary for monitoring print status remotely.

Gearberry Black Friday Sale Early!

Gearberry is excited to announce our early Black Friday sale, packed with incredible deals and exciting offers. Get ready to save big and win amazing prizes!


Part 1: 100% Winning! Save up to $1099!

Starting November 14th, all GearBerry owners can enter our Spin the Wheel game for a chance to win awesome prizes worth up to $1090. Totally free! Plus, you can get $10, $20, $30 or $40 off.

To participate, simply enter your email address between November 14 and November 30. Visit our Spin the Wheel game and try your luck at winning valuable items and coupons. Don't miss this chance to spin and win big!


Part 2: Early Black Friday Sale 50% Off Flash Sale

Right now, you can get up to 50% off on select items. Take advantage of this incredible offer and get your favorite products at half price. We have discount categories on engraving machines, 3D printers, power tools, and more. Remember, first come, first served!


Part 3: Early Black Friday Sale Brand Promotions

Explore our exclusive page featuring discounted products and special bundle offers. This is your chance to get the best deals on your favorite brands. Take advantage of markdowns and upgrade your gear at unbeatable discounts.


Part 4: The Best Gear on Gearberry! Up to 70% off + save an extra $50 with coupon!

We're taking discounts to the next level! Buy now and save up to 70% on most products. But that's not all. You can save even more with our coupon codes. Get $10 off orders over $100, $30 off orders over $300, and $50 off orders over $500. Stack these discounts and let your savings keep growing!


Part 5: Best Sellers, Up to 70% Off

In this section you will find a variety of products with discounts of up to 70%. From laser engravers to electronics, we have everything you need at unbeatable prices. Don’t miss out on these incredible deals to upgrade your devices and gadgets without breaking the bank.


Part 6: Buy More, Save More! Accessories up to 20% off!

Discover our exclusive collection of accessories and take advantage of great discounts during our Black Friday sale, which starts on November 14th. Buy any 2 accessories and get 10% off, buy 3 accessories and get 20% off. This is a great opportunity to upgrade your accessory collection while saving money.

Gearberry's early Black Friday sale is one you don't want to miss. Mark your calendars and get ready to enjoy unbeatable offers, exciting prizes and huge savings. Start shopping and enjoy the best Gearberry has to offer!


In conclusion, troubleshooting common issues with your Anycubic Photon 3D printer can be relatively simple when following the appropriate steps. If you want to know more about 3D printers, you can refer to this Buying Guide. Ensure that your build plate is clean and level, keep your resin vat filled, and use the correct settings for your resin and printer model. By addressing these common problems, you'll be on your way to producing high-quality, professional prints with your Anycubic Photon M3 or Photon M3 Plus. 

At GearBerry, we offer a wide range of 3D printers and accessories to help you take your printing game to the next level. Check out our selection today and start creating incredible 3D prints with ease.

Zusammenhängende Posts