Fixing Issues with the LONGER Ray5 10W Laser Engraver

Fixing Issues with the LONGER Ray5 10W Laser Engraver

Fixing Issues with the LONGER Ray5 10W Laser Engraver


Powerful and simple to operate, the LONGER Ray5 10W Laser Engraver produces excellent laser engraving results. Despite all of its benefits, consumers may still run into problems that need to be fixed.

In this article, I'll lead you through some typical issues with the LONGER Ray5 10W Laser Engraver and offer fixes. To help you know your machine clearer, be sure to check out GearBerry's laser engraver buying guide, which provides valuable information on laser engravers. 

Problem 1: The laser engraver is not cutting or engraving properly

It's not unusual to run into problems with a laser engraver that prevent it from properly cutting or etch the material. There are various things to check if you're having this problem.

First off, this issue is frequently brought on by poor focus. To ensure that the laser beam is adequately concentrated on the material, the laser head must be properly aligned and the focal length set to 50mm. Incorrect positioning of the laser head could cause it to miss the material, producing uneven cuts or engraved designs.

Second, make certain that the power output and speed parameters are acceptable for the material being engraved. If the laser's power output is insufficient, it may be unable to properly cut or etch the material. If the power output is too great, the material may be burned or damaged. Likewise, if the engraving pace is too slow, the material may overheat, resulting in melted or distorted edges.


Last but not least, it's critical to make sure the material is free of debris that could hinder the laser's performance. The surface of the material may contain dust, grit, or other particles that scatter the laser beam, making it difficult to produce precision engraving or cutting. To prevent this problem, it is advised to properly clean the material before engraving.

Upgrade Your Laser Engraving Game with GearBerry: Discover the Power of the Longer Ray5 10W Engraver! >>>


Problem 2: The laser engraver is producing poor quality engravings

When utilizing a laser engraver, it is conceivable that the machine will not cut or engrave the material correctly. There are various things to look at if you're having this problem.

For starters, poor focus is a common cause of this issue. To ensure that the laser beam is adequately concentrated on the material, the laser head must be appropriately positioned and the focal length set to 50mm. If the laser head is not properly positioned, the material may be missed, resulting in incomplete cuts or engravings.

The second crucial step is to make sure the power output and speed parameters are suitable for the material being etched. The laser may not be able to efficiently cut or engrave the material if its power output is too low. On the other hand, if the power output is too high, the material could burn or be harmed. The material may overheat and experience deformation or melting if the etching pace is too slow.

Finally, make sure the material is clean and clear of debris that could interfere with the laser's performance. Dust, grime, or other particles on the material's surface might scatter the laser beam, making precise cuts or engravings difficult. To avoid this problem, properly clean the material before engraving.

Longer Ray5

Problem 3: The laser engraver is overheating

A typical problem that can reduce a laser engraver's lifespan and performance is overheating. A laser engraver overheating can cause a variety of issues, such as equipment damage, subpar engravings, and even safety risks like fire or smoke.

To avoid overheating, make sure the engraver is located in a well-ventilated area with enough of ventilation. This will aid in the dissipation of heat created by the laser engraver and prevent it from accumulating in the machine's internal components. Airflow can be improved by placing the engraver in a well-ventilated area or by installing a fan to circulate air around the machine.

Make sure the engraver's thermal protection feature is turned on in addition to providing adequate ventilation. This feature is intended to keep an eye on the machine's temperature and guard against overheating by turning the laser off automatically if the temperature rises above a predetermined level.

Check the temperature gauge on a regular basis to monitor the engraver's temperature. If the temperature rises over the recommended level, turn off the engraver and wait for it to cool before restarting it. This will keep the system from overheating and causing internal component damage.

Problem 4: The laser engraver is not connecting to the computer or software

For machine control and engraving design input, a laser engraver must be connected to a computer or software. It can be frustrating and hinder you from using the machine properly if the laser engraver cannot connect to the computer or software.


Longer Ray5 laser engraver's works


A defective or incorrectly attached USB cable is one of the most prevalent reasons of connection problems. Check the USB cord and ensure it is securely connected to both the engraver and the computer to resolve this issue. To see if the problem is resolved, connect the cable to a different USB port on the computer.

An erroneous driver installation is another potential reason for connectivity problems. Before they can be utilized properly, laser engravers often need specific drivers to be installed on the computer. Make sure you have the appropriate driver for your engraver by checking the manufacturer's website, then install it in accordance with their installation instructions.

Finally, make sure that the software you're using is compatible with the laser engraver and that it's properly configured. Some engravers have their own software, while others work with third-party software like LaserGRBL or LightBurn. Check that the software you're using is compatible with your engraver and that the settings in the software are correct.

LONGER Ray5 10W laser engravers

Problem 5: The laser engraver is producing excessive smoke or fumes

Your health may be harmed by excessive smoke or fumes from a laser engraver, therefore it's critical to handle this problem right once. You can take a number of actions to reduce the quantity of smoke and fumes your engraver emits.

First, make sure the engraving machine is positioned in a space that has good airflow and ventilation. By doing this, the smoke and fumes will be spread out and won't accumulate in the air. By placing the engraver close to an open window or employing a fan to move air around the machine, good ventilation can be produced.

Longer Ray5 laser engraving artworks

To help disperse the smoke and odors, consider using a honeycomb working table or an air assist kit. A honeycomb working table improves airflow and lowers smoke and fumes created during engraving. An air assist kit can help dissipate the smoke and fumes by directing a stream of air over the material being engraved. For an effective honeycomb working table solution, consider the NEJE H8554 HONEYCOMB PANELS, which are designed to improve airflow and reduce smoke and fumes during engraving.

Finally, it's important to use materials that are suitable for laser engraving and avoid engraving materials that produce toxic fumes. Some materials, such as PVC or vinyl, can produce toxic fumes when engraved and should be avoided. Instead, opt for materials such as wood, leather, or acrylic, which produce less smoke and fumes when engraved.

Engrave Cylindrical Objects with a Laser Rotary Roller
If you're looking to engrave cylindrical objects such as cups, pens, and bottles with your LONGER Ray5 10W Laser Engraver, consider using a laser rotary roller as an accessory. A laser rotary roller is designed to ensure precision and accuracy on curved surfaces, making it an ideal solution for fixing issues related to inconsistent engravings.

SCULPFUN Laser Rotary Roller
One of the top options available on the market is the SCULPFUN Laser Rotary Roller. This accessory is easy to install and use, and it works seamlessly with the LONGER Ray5 10W Laser Engraver. With its high precision and accuracy, you can achieve consistent results on every engraving project. To use the SCULPFUN Laser Rotary Roller, simply attach your cylindrical object to the roller and insert it into the LONGER Ray5 10W Laser Engraver. The roller will rotate automatically, allowing the laser to engrave the object evenly and accurately. By using a laser rotary roller, you can achieve professional-grade engravings on a variety of cylindrical objects.

 black friday flash sale

Gearberry's Epic Early Black Friday Sale

Part 1: 100% Winning! Save Up to $1099!

Gearberry's Early Black Friday Deal is all about winning big! From November 14th, you have the chance to participate in the thrilling Spin the Wheel game and snag amazing prizes worth up to $1090, absolutely free! Simply enter your email address and try your luck for a chance to win:

Free Products: Get a chance to win a free product of your choice.

Discounts: Enjoy discounts of $10, $20, $30, or $40 on your purchase.

Part 2: Early Black Friday Deal 50% OFF Flash Sale

Don't miss out on the incredible 50% off flash sale at Gearberry! Selected items, including engraving machines, 3D printers, power tools, and more, are available at half the price. This is the perfect opportunity to grab your favorite products at a fraction of their original cost. But remember, these deals are available on a first-come, first-served basis, so act fast!

Part 3: Early Black Friday Deal Brand Sale

Explore Gearberry's exclusive page dedicated to discounted products and special bundle offers from your favorite brands. Take advantage of reduced prices and grab the best deals on a wide variety of products. Some highlights include AlgoLaser's Delta 22W Laser Engraver at 37% off, Alpha 22W Laser Engraver at 32% off, and DIY KIT Diode Laser Engraver 5W at 50% off. Upgrade your gear with top-notch brands while enjoying significant savings.

Part 4: Best Gears On Gearberry! Max 70% Off + Save Extra $50 With Coupon!

Gearberry is taking discounts to the next level with savings of up to 70% off on most products. But that's not all! Use the provided coupon codes to save even more. Enjoy $10 off orders over $100 (CODE: GBDBL1), $30 off orders over $300 (CODE: GBDBL2), and a whopping $50 off orders over $500 (CODE: GBDBL3). Stack those discounts and watch your savings grow!

Part 5: Best Sellers, Save Up to 70% OFF

Gearberry's best sellers are now available at unbeatable prices. Enjoy discounts of up to 70% off on selected products, including laser engraving machines and electronics. Upgrade your gear, gadgets, and equipment without breaking the bank. Prices are plummeting, so make sure to take advantage of these amazing savings!

Part 6: Buy More, Save More! Up to 20% Off Accessories!

Enhance your style and meet your needs with Gearberry's collection of accessories available at discounted prices. During the Early Black Friday Deal, all accessories are available at 10% off for 2 pieces and 20% off for 3 pieces. Upgrade your accessories collection while saving money!

Embrace the excitement of Gearberry's Early Black Friday Deal and save big on your favorite products. With the Spin the Wheel game, flash sales, brand deals, massive discounts, and exclusive offers, Gearberry is the ultimate destination for incredible savings this Black Friday. Plan your shopping, take advantage of the amazing discounts, and have a blast finding the perfect deals. Happy shopping and best of luck in snagging the best savings this Black Friday!


Powerful and adaptable, the LONGER Ray5 10W Laser Engraver can create fine engravings on a range of surfaces.  If you're looking to upgrade your LONGER Ray5 10W Laser Engraver, you might want to consider adding the NEJE E40 Laser Module to your setup. The NEJE E40 Laser Module is a high-quality accessory known for its precision and reliability. Not only does it offer more power and speed than the standard laser module that comes with the LONGER Ray5 10W Laser Engraver, but it also features a larger working area of up to 40x40mm, which means you can engrave larger items or cover more surface area in less time. Additionally, the NEJE E40 Laser Module is compatible with a variety of materials, including wood, leather, and acrylic, making it a versatile addition to your engraving toolkit. But like any machine, it could have problems that need to be fixed. You can make sure that your laser engraver keeps working well and efficiently for many years to come by using the advice and fixes provided in this article. If you're interested in purchasing a LONGER Ray5 10W Laser Engraver or other desktop laser engravers, check out GearBerry's website. We are convinced that we have the ideal machine for you thanks to our large selection of dependable machines from well-known manufacturers and our dedication to customer satisfaction and safety. GearBerry offers a large selection of laser engraving machines and accessories from well-known manufacturers such as Longer, Ortur, and EleksMaker to meet your needs.

Related posts