Getting Started with Kingroon KP3S Pro S1: A Guide for Beginners

Getting Started with Kingroon KP3S Pro S1: A Guide for Beginners

Getting Started with Kingroon KP3S Pro S1: A Guide for Beginners

The Kingroon KP3S Pro S1 printer could be just what you need if you're new to 3D printing and searching for an affordably priced, beginner-friendly model. This small printer has a respectable print capacity and a number of features that make it dependable and simple to operate. Check out GearBerry's Best 3D printer of 2023, which offers helpful advice on choosing the best machine for your needs, to aid you in making an informed purchase decision. We'll walk you through the Kingroon KP3S Pro S1 setup procedure in this article, from unpacking and assembly to printing your first object. This manual will assist you in letting your creativity run wild and putting your ideas into action, whether you're a student, a hobbyist, or a DIY enthusiast.

II. Unboxing and Assembly

The first step to getting started with your Kingroon KP3S Pro S1 3D printer is unboxing and assembling it. Here's what you need to do:

1. Checking for all components

Take the printer out of the box and make sure you have all the components. The package should include:

The printer frame and base

The print bed

The extruder assembly

The power supply

The spool holder

The filament guide tube

Screws, nuts, and other small parts

Inspect each item to make sure it's not damaged or missing any parts.

Kingroon KP3S Pro S1

2. How to assemble the printer

The Kingroon KP3S Pro S1 comes 95% pre-assembled, so putting it together is not too difficult. The steps you must take are as follows:

1. Attach the gantry to the frame using the provided screws and nuts.

2. Install the Z-axis linear guide rails and the Z-axis stepper motor.

3. Attach the X-axis and Y-axis linear guide rails to the gantry.

4. Install the print bed and level it using the provided knobs.

5. Install the extruder assembly and feed the filament through the extruder and the filament guide tube.

6. Attach the spool holder to the frame and load the filament spool onto it.

7. Connect the power supply to the printer and turn on the power.

Once you've assembled your Kingroon KP3S Pro S1, you're ready to start printing!

GearBerry Presents: Kingroon KP3S Pro S1 Beginner's Guide. Start 3D Printing Today. >>>

III. Printer Features and Specifications

Now that you have your Kingroon KP3S Pro S1 3D printer assembled, let's take a closer look at its features and specifications.

Compact design

Decent print volume

Reliable titan direct extruder

Built-in switching power supply

X, Y, and Z-axis linear guide rails

Fused Deposition Modeling (FDM) extruder

Work area of 200 x 200 x 200mm

Printing resolution and nozzle diameter

Printing resolution of 0.05-0.2mm

Nozzle diameter likely to be around 0.4mm

95% pre-assembled

Low noise level

Power loss recovery feature

Kingroon KP3S Pro S1 3D printer

IV. Printing with the Kingroon KP3S Pro S1

Let's step through the process of producing your first object now that your Kingroon KP3S Pro S1 3D printer is ready to use.

1. Preparation steps before printing

Before you start a print job, you need to make sure the print bed is level and the filament is loaded correctly. Here's what you need to do:

Turn on the printer and let it heat up.

Use the provided knobs to level the print bed. You can use a piece of paper to check the gap between the nozzle and the bed.

Load the filament into the extruder and make sure it's feeding smoothly. You can do this by pushing the filament through the extruder manually until it comes out of the nozzle.

2. How to start a print job

Once the printer is set up and the bed is level, you're ready to start a print job. Here's how:

1. Prepare your 3D model using a slicing software like Cura or Simplify3D. Make sure you select the correct printer and filament settings.

2. Save the sliced file to an SD card and insert it into the printer.

3. Use the printer's menu to select the file and start the print job.

4. Monitor the print job and make sure it's progressing smoothly. You can adjust the temperature or speed settings if necessary.

5. Once the print is finished, let the printer cool down before removing the object from the bed.

Kingroon KP3S Pro S1 3D printers

3. Tips for troubleshooting common printing issues

Even with a well-calibrated printer, you may encounter some common printing issues, such as stringing, warping, or under-extrusion. Here are some tips to help you troubleshoot these issues:

Stringing: Reduce the temperature or increase the retraction settings in your slicing software.

Warping: Use a heated bed or add a brim or raft to your model to improve adhesion.

Under-extrusion: Check the filament feed rate and make sure the extruder is clean and free of debris.

By following these steps and tips, you should be able to print high-quality objects with your Kingroon KP3S Pro S1 3D printer.

V. Advanced Features

The Kingroon KP3S Pro S1 3D printer also comes with some advanced features that set it apart from other budget 3D printers. Here's a closer look:

1. Laser engraving: Wood, leather, plastic, and other materials can all be engraved with designs using the printer's 500mW laser engraving module. The ability to customize phone cases and make unique gifts thanks to this function brings up new creative opportunities.

2. Support for various materials: A variety of filament types, including PLA, ABS, TPU, and PETG, can be used with the printer. In order to construct products with distinctive qualities, you can experiment with various materials and properties.

You must install the laser module and modify the printer's settings in order to use these advanced features. Increased versatility, more creative options, and the capacity to deal with a variety of materials are all advantages of these qualities.

Kingroon KP3S Pro S1 3D printing

Kingroon KP3S Pro S1: Your Path to 3D Printing Success. Shop Now at GearBerry. >>>

VI. Pros and Cons

Like any 3D printer, the Kingroon KP3S Pro S1 has its advantages and disadvantages. Here's a summary of the pros and cons:

Pros:

Compact design and easy assembly

Relatively low noise level

Good print quality and resolution

Advanced features, such as laser engraving and support for various materials

A surprisingly affordable price of $229.00 USD is appropriate for novices.

Cons:

Extremely basic functions

Limited printing ability

Gearberry Black Friday Sale Early!

Gearberry is excited to announce our early Black Friday sale, packed with incredible deals and exciting offers. Get ready to save big and win amazing prizes!

 

Part 1: 100% Winning! Save up to $1099!

Starting November 14th, all GearBerry owners can enter our Spin the Wheel game for a chance to win awesome prizes worth up to $1090. Totally free! Plus, you can get $10, $20, $30 or $40 off.

To participate, simply enter your email address between November 14 and November 30. Visit our Spin the Wheel game and try your luck at winning valuable items and coupons. Don't miss this chance to spin and win big!

 

Part 2: Early Black Friday Sale 50% Off Flash Sale

Right now, you can get up to 50% off on select items. Take advantage of this incredible offer and get your favorite products at half price. We have discount categories on engraving machines, 3D printers, power tools, and more. Remember, first come, first served!

 

Part 3: Early Black Friday Sale Brand Promotions

Explore our exclusive page featuring discounted products and special bundle offers. This is your chance to get the best deals on your favorite brands. Take advantage of markdowns and upgrade your gear at unbeatable discounts.

 

Part 4: The Best Gear on Gearberry! Up to 70% off + save an extra $50 with coupon!

We're taking discounts to the next level! Buy now and save up to 70% on most products. But that's not all. You can save even more with our coupon codes. Get $10 off orders over $100, $30 off orders over $300, and $50 off orders over $500. Stack these discounts and let your savings keep growing!

 

Part 5: Best Sellers, Up to 70% Off

In this section you will find a variety of products with discounts of up to 70%. From laser engravers to electronics, we have everything you need at unbeatable prices. Don’t miss out on these incredible deals to upgrade your devices and gadgets without breaking the bank.

 

Part 6: Buy More, Save More! Accessories up to 20% off!

Discover our exclusive collection of accessories and take advantage of great discounts during our Black Friday sale, which starts on November 14th. Buy any 2 accessories and get 10% off, buy 3 accessories and get 20% off. This is a great opportunity to upgrade your accessory collection while saving money.

Gearberry's early Black Friday sale is one you don't want to miss. Mark your calendars and get ready to enjoy unbeatable offers, exciting prizes and huge savings. Start shopping and enjoy the best Gearberry has to offer!

 

Conclusion

Overall, anyone looking for an entry-level or hobbyist 3D printer with some cutting-edge features may choose the Kingroon KP3S Pro S1. Visit GearBerry which is a leading online platform that offers a wide range of affordable and high-quality 3D printers, including the the Kingroon KP3S Pro S1 and other popular models.

For more experienced users who need higher print quantities or faster print rates, it might not be the best option. We advise spending some time calibrating the printer and experimenting with different settings if you want to start 3D printing with the Kingroon KP3S Pro S1. Additionally, before moving on to more complex things, we advise starting with smaller and simpler projects. Last but not least, remember to check out the 3D printer buying guide for more information and possibilities before making a decision.

Related posts